ARP-P4: deep analysis of a hybrid SDN ARP-Path/P4Runtime switch

Telecommunication Systems - The Software-Defined Networking (SDN) architecture decouples the control plane from the data plane, but it does not explicitly state where the control should be located....     

Sea-air flux of CO2 in the Caribbean Sea estimated using in situ and remote sensing data

Empirical relationships between sea surface carbon dioxide fugacity (fCO₂^sw) and sea surface temperature (SST) were applied to datasets of remotely sensed SST to create fCO₂^sw fields in the Caribbean Sea. SST datasets from different sensors were used, as well as the SST fields created by optimum interpolation of bias corrected AVHRR data. Empirical relationships were derived using shipboard fCO₂^sw data, in situ SST data, and SST data from the remote sensing platforms. The results show that the application of a relationship based on shipboard SST data, on fields of remotely sensed SST yields biased fCO₂^sw values. This bias is reduced if the fCO₂^sw-SST relationships are derived using the same SST data that are used to create the SST fields. The fCO₂^sw fields found to best reproduce observed fCO₂^sw are used in combination with wind speed data from QuikSCAT to create weekly maps of the sea-air CO₂ flux in the Caribbean Sea in 2002. The region to the SW of Cuba was a source of CO₂ to the atmosphere throughout 2002, and the region to the NE was a sink during winter and spring and a source during summer and fall. The net uptake of CO₂ in the region was doubled when potential skin layer effects on fCO₂^sw were taken into account.     

Inherent emf relaxation of electrochemical cells with nanocrystalline Ag electrodes

The open circuit voltage of the electrochemical cell Ag (nano)|solid silver electrolyte|Ag (macro) is found to be inherently unstable. Even under conditions which support the morphological stability of the arrangement of nanocrystalline silver, the particles grow significantly as soon as they function as electrodes; i.e. when they are in contact with a silver electrolyte and connected electronically at the same time. The process is shown to be due to electrochemical Ostwald ripening with the interfacial transfer of Ag⁺ through the Ag/electrolyte interface being the rate limiting step. Its activation energy is 0.01 eV. The decay is in good agreement with modelling results.     

Conditions for the equivalence between IQC and graph separation stability results

This paper provides a link between time-domain and frequency-domain stability results in the literature. Specifically, we focus on the comparison between stability results for a feedback interconnection of two nonlinear systems stated in terms of frequency-domain conditions. While the integral quadratic constrain (IQC) theorem can cope with them via a homotopy argument for the Lurye problem, graph separation results require the transformation of the frequency-domain conditions into truncated time-domain conditions. To date, much of the literature focuses on ‘hard’ factorisations of the multiplier, considering only one of the two frequency-domain conditions. Here it is shown that a symmetric, ‘doubly-hard’ factorisation is required to convert both frequency-domain conditions into truncated time-domain conditions. By using the appropriate factorisation, a novel comparison between the results obtained by IQC and separation theories is then provided. As a result, we identify under what conditions the IQC theorem may provide some advantage.     

Single-channel EEG measurement of engagement in virtual rehabilitation: a validation study

Virtual Reality - Stroke rehabilitation suffers from low levels of patient engagement, impeding recovery. Virtual rehabilitation (VR) approaches can improve patient outcomes; however, there is...     

Analysis of time-gated imaging through scattering media by a Fourier optics approach

The method of Fourier optics is applied to the problem of time-gated imaging through scattering media. Tb adapt the problem to this treatment, appropriate alterations are made: The continuous medium is replaced by a cascade of thin scatterers, and a spatial filtering process is substituted for the conventional gating processes. Closed-form solutions are derived.     

Neural Networks Approach to the Random Walk Dilemma of Financial Time Series

Predictions of financial time series often show a characteristic one step shift relative to the original data as in a random walk. This has been the cause for opposing views whether such time series do contain information that can be extracted for predictions, or are simply random walks. In this case study, we show that NNs that are capable of extracting weak low frequency periodic signals buried in a strong high frequency signal, consistently predict the next value in the series to be the current value, as in a random walk, when used for one-step-ahead predictions of the detrended S&P 500 time series. In particular for the Time Delay Feed Forward Networks and Elman Networks of various configurations, our study supports the view of the detrended S&P 500 being a random walk series. This is consistent with the long standing hypothesis that some financial time series are random walk series.     

(Ba,Ca)TiO3 PTCR Ceramics with LaNiO3 Thin-Film Electrodes: Preparation and Characterization of the Interface

Conductive LaNiO₃ thin film electrodes were deposited by chemical solution deposition (CSD) from nitrate solutions onto polycrystalline Al₂O₃ and (Ba,Ca)TiO₃ PTCR ceramic substrates. The electrical properties of the LaNiO₃ thin film on Al₂O₃ and of the interface consisting of LaNiO₃ and the semiconductive oxide ceramic were investigated. The deposited LaNiO₃ films were about 250 nm thick and consisted of nanosized particles. The resistivity of the LaNiO₃ film was about 3 × 10^-3cm at 20°C. The PTCR ceramic consisted of m sized particles and exhibited an electronic resistivity of about 10 cm at 20°C and a steep increase of the resistivity of a few orders of magnitude above the Curie point at about 120°C. The electrical properties of the LaNiO₃/PTCR interface were dominated by the properties of a barrier layer between the PTCR ceramic and the LaNiO₃ electrode. The potential dependence of the impedance indicated that the barrier layer consisted of a depletion layer within the PTCR ceramic, when the flat band potential of LaNiO₃ on the PTCR ceramic at about –250 mV was exceeded. Additionally the formation of an insulating layer at the LaNiO₃ electrode has to be taken into account.     

Effect of thermo-pressing temperature on the functional properties of bioplastics made from a renewable wheat gliadin resin

In this work a new methodology based on thermo-pressing a resin made from gliadins and glycerol has been developed to obtain water resistant films. The effect of processing temperature was studied on the functional properties of the films. The results of SDS-PAGE analysis of the molecular weight profiles of the resulting films were indicative of disulfide/sulfhydryl interchange reactions giving rise to the formation of intermolecular disulfide bonds between the gliadin units. These reactions augmented the degree of cross-linking of the matrix, which increased with thermo-pressing temperature, as evidenced by the residual reaction enthalpy values determined by MDSC as well as by cross-linking density values determined from tensile tests. In consequence the films produced at high temperature had better water resistance upon immersion, greater maximum tensile strength and Young's modulus values, and lower water vapor and oxygen permeabilities compared with cast films. Based on the analytical test results, thermo-pressing the resin in successive time/force steps along with a temperature of 130 °C produced gliadin films with improved properties.